- Description
1>. (40 Channel);
2>. (Support touch switch and PWM/Touch switch select
channel);(Support touch switch select frequency group)
3>. 25mW(13dBm)/200mW(23dBm),Support25mW/200mW Select with five LED display high power
4>. LED displays channel and status information
5>. With OSD input and output interface
6>. Directional stick antenna
7>. (Power input):5V :25mw下300ma,200mw下500ma
8>.(Miniature and light weight design );27*27mm,4g
1.2 RF (transmission frequency group):
A Group : Ch1:5865MHz Ch2:5845MHz Ch3:5825MHz Ch4:5805MHz
Ch5:5785MHz Ch6:5765MHz Ch7:5745MHz Ch8:5725MHz
B Group : Ch1:5733MHz Ch2:5752MHz Ch3:5771MHz Ch4:5790MHz `
Ch5:5809MHz Ch6:5828MHz Ch7:5847MHz Ch8:5866MHz
C Group : Ch1:5705MHz Ch2:5685MHz Ch3:5665MHz Ch4:5645MHz
Ch5:5885MHz Ch6:5905MHz Ch7:5925MHz Ch8:5945MHz
D Group : Ch1:5740MHz Ch2:5760MHz Ch3:5780MHz Ch4:5800MHz
Ch5:5820MHz Ch6:5840MHz Ch7:5860MHz Ch8:5880MHz
E Group : Ch1:5658MHz Ch2:5695MHz Ch3:5732MHz Ch4:5769MHz
Ch5:5806MHz Ch6:5843MHz Ch7:5880MHz Ch8:5917MHz
2、(Electrical Characteristics )
(Item) (SPEC.)
(Frequency band) 5645~5917MHz
(Channel customer) 40
(Modulation type) FM
(Channel SEL.) Touch Switch
(Channel Indicate) CH1~CH8 Channel indication with 1LEDS andA~E frequency
group Indicate with 5LEDS
(Transmit power) 13±1dBm~23±1dBm(Switchable)
(Frequency control) PLL
(All harmonic) Max -50dBm
(Frequency Stability) ±100KHz (Typ.)
(Frequency precision) ±200KHz (Typ.)
(Channel Carrier error) 1dB
(Antenna Port) 51 Ω
(Base-band interface) (P2.0*4)
(Power consumption) 200~550MA@5V DCIN
(Supply Voltage) 4.5-5.5v
(Operating Temperature) -10℃~+60℃
Profile dimens:27mmX27mmX4MM;Screw boss:20X20MM;Pitch-row:2MM,2.8g
3、 (Pin Assignment)
4 、(Directions)
(Transmitted power selected still touch up to 6S,Switch 3 leds light up 3 seconds after success, that is 25 mw mode, if five leds light up 3 seconds that is 200 mw)
(Frequency group A~E selected still touch up to 3S,5 LED indicates the current frequency, such as the current frequency is the second group, the second LED grow light)
(Channel ch1~ch8 selected with short touch,Short press CH led will flash once, corresponding to the frequency of current frequency under the group to CH8, the led will normally on instructions)